Miscellaneous Equipment & Machinery Deals!

Miscellaneous Listings

Can’t find a listing on the machine you need? Tell us what you want and we will locate the machine that you are looking for!

Item No. M1004 Description: Griggio T2000 Shaper 3phase, 9 Hp, 1 1/4 shaft Very smooth running, Maggie Steff 2038 Power feed included (also 3 phase) (Click to Enlarge)

Item No. M1009 Description: Diesel forklift with 15,500 lb lift capacity, 2 stage mast, 177” Ht. Good working condition. (Click to Enlarge)

Price: $15,000 (Asking) FOB GA Condition: Good (Rating - 5)

1998 Nissan Forklift - Model 155 This page is dedicated to roof truss equipment that you will not find on other parts of the Truss Machinery Connections website. Here you will find forklifts, air compressors, trucks general woodworking equipment and other miscellaneous equipment for your truss plant.

Price: $2,000 (Type) FOB FL Condition: Very Good (Rating - 6)

Griggio T2000 Shaper

Item No. M1010 Model SSR UP6-25-125 - 25HP Continuous Duty Rotary Screw Air Compressor - Rated for air delivery of 102 CFM, presure of 125 PSI and has a 120 gal tank. [77.5”L X 36”W X 71”H, 1510 lbs] Quiet 65 to 69 dBA operation. Voltage Rating 230/460 Volts, Phase Three, Current Rating 61.2/30.6 Amps

Price: $7,500 (Asking) FOB FL Condition: Very Good (Rating - 6)

2005 Ingersoll-Rand Air Compressor (Click to Enlarge)

Item No. R1048 Truswal C-Clamp System with 2 clamp presses, 30 tables, (No steel flooring)

Price: $10,000 (OBO) FOB ID Condition: Good (Rating - 3)

Truswal C-Clamp System (Click to Enlarge)

Item No. M1011 This Panel Clip C-Clamp system comes equipped with (2) C-Clamp heads with hydraulic power units & counterbalance arms. Also included is the overhead beam and truss jigging stations. System is complete and in good working condition.

Price: $8,900 (Asking) FOB MO Condition: Good (Rating - 4)

Panel Clip - C-Clamp “The Klincher System” (Click to Enlarge)

Item No. M1012 This delivery truck has a 24ft. dump roller bed and plenty of extras and is like new (84K miles). Features a Cat 3126b-250 hp engine, Eaton Fuller transmission (rto- 11908LL), new aluminum wheels, A/C, cruise, air ride suspension, and an aluminum tool box. It has a rear axle ratio 4.88 and a 249 inch wheel base. It also has new steers 85% virgin drive tires (11R22.5). The 24ft bed is equipped with locking rollers and a dump valve. There are also rollers on the tail board, This truck is perfect for hauling trusses and lumber.

Price: $49,900 (Asking) FOB CO Condition: Very Good (Rating - 8)

2001 Sterling Truck w/ Dump Roller Bed (Click to Enlarge)

Live Support by Comm100

Item No.M1013 Quincy Air Compressor - Model QUM-15. 120 gal tank, 15HP. Includes a Quincy air dryer model QITD-100. Power: 460V 3Ph

Price: $7,500 (Asking) FOB TX Condition: Very Good (Rating - 7)

2004 Quincy Air Compressor w/ Dryer (Click to Enlarge)

Item No. M1014 1998 Nissan 90 Capacity: 9000 lbs Mast: Two-stage Pneumatic Tires: Dual Drive Engine Type: Diesel

Price: $8,500 (Asking) FOB TX Condition: Good (Rating - 5)

1998 Nissan Forklift (Click to Enlarge)

Item No. M1015 Capacity: 5000 lbs Engine type: LPG

Price: $3,500 (Asking) FOB TX Condition: Good (Rating - 5)

1995 Datsun Forklift (Click to Enlarge)

$29,900

$7,900

$3,200

$6,900

Item No. M1019 Eagle roof truss field repair press - Model FRP15-462A. Pistol Grip Handle 1 HP Motor and Pump 20,000 lbs. of Pressing Power 4" x 4" Platens Magnets to Hold Plates in Position Automatic Shut-Off upon Switch Release 3 Position Support Handle

Price: $3,500 (Asking) FOB GA Condition: Very Good (Rating - 8)

Portible Eagle Plate Press (Click to Enlarge)

Item No. M1018 12,000 lbs Clarke Forklift - Model CFY150B. Two stage lift. Machine has been converted to propane

Price: $5,000 (Asking) FOB GA Condition: Fair (Rating - 1)

Clarke Forklift (Click to Enlarge)

Item No. M1020 1983 Kellogg American Air Compressor - Model A462tVX Tank size - 120 gallons Volume @ 100 psig 100 CFM Main motor 20 HP Electrical 230/460/3/60 Dimensions (L x W x H) 69" x 31" x 60" Weight 1000 lbs.

Price: $2,500 (Asking) FOB GA Condition: Good (Rating - 5)

Kellogg American Air Compressor (Click to Enlarge)

Item No. M1021 Caterpiller - Model V120. 12000 lbs capacity 4 Cylinder Perkins Diesel 124" Lift Height 8’ Forks 2WD

Price: $5,000 (Asking) FOB GA Condition: Good to Very Good

Caterpiller - Model V120 (Click to Enlarge)

Item No. M1023 2006 Virtek Laser Projection System. (Qty-5) model LPS-7RH red-laser heads, with 20' coverage each (100' @ 16'+ projector height), with system PC, mounting hardward and cables. System is complete and in very good working order. Virtek license agreement required, Virtek maintenance agreement suggested.

Price: $54,900 (Asking) FOB GA Condition: Very Good (Rating - 8)

2006 Virtek Laser Projection System (Click to Enlarge)

Item No. M1024 Detroit Series 60 430 hp (Mileage 456,747) Features a 10 speed Rockwell HiLo transmission and a Hiab 175-4 crane (Cargotec 7284) Front Axle 12,000 lbs Rear Axle 20,000 lbs Rear Rear Axle 20,000 lbs

Price: $29,900 (Asking) FOB PA Condition: Very Good (Rating - 6)

1997 Ford Aeromax Crane Truck (Click to Enlarge)

Item No. M1025 System includes C-Clamp, (1) complete overhead mono-press hydraulic power unit, counterbalance arm, & over head steel i-beam.

Price: $3,500( Asking) FOB NC Condition: Good (Rating - 5)

Mark-8 C-Clamp Press (Hydro-Air Mono-Press) (Click to Enlarge)

Item No. MS1026 The Vecoplan RG42/30 SWU rotary shredder is designed especially for size reduction of plastics, wood residue, trim blocks, panel scraps, furniture parts, pallets, dunnage, cardboard and paper, and medical waste. • Low speed / high torque design • Low RPM / low noise • Large infeed hopper • Hopper Opening: 42" x 48" • Hopper Volume: 2.9 Cubic Yards