Find a Linear Saw.

Item No. LS1006 Description: 2001 TCT LInear-Feed Saw - Model 1000. This TCT 1000 model was designed to 2x4 webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side. Also includes a scrap conveyor and a Matthews ink-jet printing system. Computer, monitor, motion control card and TCT software are all included and in good working condition. Cuts down to 15 degrees. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 20” Blade (Click to Enlarge)

Linear Saw technology has swept the country for good reason. Unmatched efficiency is that reason!

[Ratings: Fair = 1-2, Good = 3-5, Very Good = 6-8, Excellent = 9-10]

Can’t find a listing on the machine you need? Tell us what you want and we will locate the machine that you are looking for!

Item No. LS1015 Description: 2003 Alpine ALS Linear-Feed Saw. This saw was upgraded to model 276 capabilities in 2005. Cuts truss parts from 2x3 to 2x12 lumber width, cuts bevels from 90 to 25 degrees, 60"+ scarf cuts, optimizes material, Includes a Matthews ink jet printer. All servo controlled functions. (Click to Enlarge)

Item No. LS1017 Description: 2006 TCT Linear-Feed Saw w/ Auto-Feeder - Model 1200B Cut Top Chords, Bottom Chords, Webs, Wedges and even Scissor Bottoms (2x3 through 2x8 Widths). Cut 4 angle webs as short as 13 1/2” (3 angles as short as 3”). Cut Steep Angles & Long Scarf Cuts. Simplest Electronic and Mechanical Design on the Market. (Click to Enlarge)

Price: $58,900 (Asking) FOB FL Condition: Good (Rating - 5)

2003 Alpine ALS

Price: $72,000 (Asking) FOB GA Condition: Very Good (Rating - 7)

2006 TCT Linear Saw - Model 1200 w/ Auto-Feeder

Price: $34,000 (Asking) FOB FL Condition: Good (Rating - 5)

2001 TCT Linear-Feed Saw

Item No. LS1022 Description: 2004 TCT LInear-Feed Saw - Model 1100. Cuts 2x4 & 2x6 material including tops, bottoms, webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side & also a scrap conveyor. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade.

Price: $28,900 (Asking) FOB FL Condition: Good (Rating - 5)

TCT Linear Saw Model 1100 (Click to Enlarge)

Item No. LS1023 2004 TCT LInear-Feed Saw - Model 1100. This TCT 1100 model was designed to 2x4 & 2x6 material including tops, bottoms, webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side. Also includes a scrap conveyor and a Matthews ink-jet printing system. Computer, monitor, motion control card and TCT software are all included and in good working condition. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade

Price: $29,900 (Asking) FOB FL Condition: Very Good (Rating - 6)

2004 TCT Linear-Feed Saw (Click to Enlarge)

Item No. LS1024 2005 TCT LInear-Feed Saw - Model 1150. This High-Speed TCT 1150 model was designed to 2x4 & 2x6 material including tops, bottoms, webs, sliders, wedges and even scissor bottoms. This saw features built in roller conveyors on both the infeed and outfeed side. Also includes a scrap conveyor and a Matthews ink-jet printing system. Computer, monitor, motion control card and TCT software are all included and in good working condition. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade

Price: $34,900 (Asking) FOB FL Condition: Very Good (Rating - 6)

2005 TCT Linear-Feed Saw (Click to Enlarge)

Item No. LS1014 Description: 2005 TCT LInear-Feed Saw - Model 1100. Model1100 was designed to 2x4 & 2x6 material including tops, bottoms, webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side & also a scrap conveyor. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade.

Price: 39,000 (OBO) FOB AZ Condition: Good (Rating - 4)

2005 TCT Linear-Feed Saw (Click to Enlarge)

Live Support by Comm100

Item No. LS1026 Description: 2004 TCT LInear-Feed Saw - Model 1100. Model Designed to 2x4 & 2x6 material including tops, bottoms, webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side & also a scrap conveyor. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade. This saw is mechanically sound and in good working condition

Price: $29,900 (Asking) FOB AZ Condition: Good (Rating - 5)

2004 TCT Linear-Feed Saw (Click to Enlarge)

$22,900

$30,000

$30,900

Item No. LS1027 The X4 Linear Saw cuts up to four sticks of wood at a time and cuts standard truss parts from any size lumber. Optimizes and nest cuts to minimize waste. Cuts extremely long scarf cuts (60” or more). Boards are automatically loaded (via live deck) against the cutting fence, clamped, fed through the saw, cut, labeled and sorted on to an out-feed queue. This saw also includes a hydraulic oil heater, Mathews printer, and transformer. This saw has been updated with air cleaners and bigger hydraulic rams on the in-feed system. Saw is currently in production.

Price: $78,900 (Asking) FOB UT Condition: Very Good (Rating - 8)

2007 Alpine X4 Linear Saw (Click to Enlarge)

$69,900

Item No. LS1028 This TCT model 1100 is in good working condition and was in service until 4/1/2011. Includes in-feed and out-feed roller tables, a scrap conveyor, and a Matthews ink-jet printing system. Computer, monitor, motion control card and TCT software are all included and in good working condition. Cuts down to 11 degrees on 2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”. 24” Blade

Price: $35,000 (OBO) FOB MD Condition: Good (Rating - 5)

2004 TCT Linear-Feed Saw (Click to Enlarge)

$18,900 $16,900

Item No. LS1029 TCT LInear-Feed Saw - Model 1000. Designed to cut 2x4 material including webs, sliders and wedges. This saw features built in roller conveyors on both the infeed and outfeed side, scrap conveyor & a Matthews ink-jet printing system . This saw has been well maintained and is in very good working condition. Saw is very dependable and is still in service.

Price: $29,900 (Asking) FOB FL Condition: Very Good (Rating - 6)

2003 TCT Linear-Feed Saw (Click to Enlarge) Only $14,900

Item No. LS1004 Designed to cut all roof truss parts (2x3 through 2x12) in a just-in- time manner at speeds that match or outperform even the fastest automated component saws. Cut all scarf cuts and any angles (regardless of length and degree). Cuts 4 angle parts as small as 10 1/2”. Feed-side inkjet printing system for marking all parts. .

Price: $135,000 FOB FL Condition: New (Rating - 10)

Brand New TCT XL Linear Saw w/ Auto-Feeder (Click to Enlarge)

Automated Component Saw speed in a Linear Saw!

Item No. LS1030 This Alpine ALS was installed new in 2003 and had a 276 upgrade in 2005. Cuts truss parts from 2x3 to 2x12 lumber width, cuts bevels from 90 to 25 degrees, 60"+ scarf cuts, optimizes material, Includes a Matthews ink jet printing system but needs a new print head. All servo controlled functions. Drive belts have moderate wear and the saw cuts accurately. Waste belt may need to be replaced in the near future. Saw is in good shape mechanically and electronically but does need a new operator touch screen. Comes with a gravity out-feed queue roller table.

Price: $49,900 (Asking) FOB FL Condition: Good (Rating - 5)

2003 Alpine ALS w/ 276 upgrade (Click to Enlarge)

$24,900

Item No. LS1031 Linear Saw w/ live-deck feeder, milling head (currently setup for Jack-Beveling operation), & out-feed. This is a CNC saw capable of cutting a wide range of roof, floor and wall framing components, including wood I-joists, laminated strand lumber (LSL), laminated veneer lumber (LVL) and glue-lams. (Saw is disassembled and ready to ship.) Used only for about 2 years in production!

Price: $85,900(Asking) FOB FL Condition: Very Good (Rating - 8)

2005 Hundegger SC-1 (Click to Enlarge)

Item No. LS1032 2006 Koskovich Omni Miser RT- Servo Controlled angulation axis of movement for roof truss (Square & Angle cut) components. With optional extended incline deck, 5 lumber magazines (3 - 2x4, 2 - 2x6), bulk feeder (handles full units of lumber to 16'), "A" print option (one face) Includes automates lumber advance (LASM), auto exit roller, vibrating trash pan, 5HP, 2450 RPM arbor motor, computer monitor, console, 220/440v 3 PH, spare blade and spare parts kit. This saw is in very good condition and in-use inside every day.

Price: $97,900 (Asking) FOB MB, Canada Condition: Very Good (Rating - 8)

2006 Omni Miser RT w/ Live-Deck, Bulk Feeder & Magazines (Click to Enlarge)

Item No. MS1033 The Spida Trussmaster optimizes by truss and will cut in a linear fashion as many components as possible from each stick of lumber. Industrial caterpillar track powers clamp that runs the length of bench and holds lumber at end. Equipped with four pneumatic vertical clamps that work independently depending on cut and two pneumatic horizontal clamps. Features a uniquely engineered base that moves out from initial position while timber is clamped to allow for a long scarf cuts over 59.1”(1.5m). Pop-up saw with 7.5 hp motor swivels to give 5 – 175 deg angular capacity (Virtually unused, $136,000 new)

Price: $35,900 (Asking) FOB NV Condition: Excellent (Rating - 9)

2006 Spida Trussmaster (Click to Enlarge)

Item No. LS1035 The Omni Mini Miser - the automated cutting and marking system for wall panel components. This system features a live-deck, bunk feeder, multilple lumber cartridges and an injet printing system.

Price: $32,900 (asking) FOB TX Condition: Good

Omni Mini Miser (Click to Enlarge)

MenuMaker produced NavBar