Find a Component Saw

Item No. CS1001 Description: This Timbermill MH6B20 cuts 2X4's though 2X12's and also cuts 4X2 floor webs. Cut pieces as short as 12" and as long as 20 feet. Length and angle changes are powered. Waste conveyor included. Saw is in good working condition and ready to be installed at your plant. Wired for 208V 3 phase. Includes an extra set of blades. (Click to Enlarge)

Item No. CS1002 Description: 1996 Timbermill component saw - Model 620 Pro. This saw cuts 2X4's through 2X12's and also cuts 4X2 floor webs. Cut pieces as short as 12" and as long as 20 feet. Length and angle changes are powered. Saw isin good working condition and includes an extra set of blades. Wired for 240V 3 phase. Motivated seller. Make an offer! (Click to Enlarge)

Component Saws offer simple and economical cutting solutions. No computers needed!

[Ratings: Fair = 1-2, Good = 3-5, Very Good = 6-8, Excellent = 9-10]

Can’t find a listing on the machine you need? Tell us what you want and we will locate the machine that you are looking for!

Item No. CS1007 Description: Timbermill MH6-20 - 6 head Component Saw. Manufactured in the mid 1990’s. Cuts 2X4's though 2X12's and also cuts 4X2 floor webs. Cut pieces as short as 12" and as long as 20 feet. Length and angle changes are powered. Three saws to choose from.

(Click to Enlarge) 3 to Choose From!

Item No. CS1005 Description: 2000 MiTek Smart-Set . This saw is a power-assisted manual setup 4-headed component saw. Cutting data is setup via toggle switches and LCD read-outs at the main panel. Cuts 2x4 though 2x12. Lengths range from 24” to 20’ (Cut verticals down to 18”). Features automatic brakes on all four blades, 24” wide full length scrap conveyor and an adjustable “Thru-Cut” tracking blade to hold lumber in position as it passes through the cutting blades. 240V, 3PH Electric (Click to Enlarge)

Item No. CS1013 Description: 1995 MiTek Easy-Set Component Saw - Model 1000. This saw is a semi-automatic five-bladed component saw. Cuts 4x2’s and 2x4 through 2x12’s. All quadrants have powered angulation w/ electronic digital readouts and independent powered vertical adjustments, w/ digital centerline readouts. (Click to Enlarge)

Price: $12,000 (OBO) FOB TN Condition: Good (Rating - 5)

1986 Timbermil

Price: $10,000 (Asking) FOB FL Condition: Good (Rating - 3)

Timbermill MH6-20

Price: $17,000 (OBO) FOB FL Condition: Good (Rating - 5)

1996 Timbermill 620 Pro

Price: $17,250 (Asking) FOB CO Condition: Good (Rating - 4)

1995 Mitek Easy-Set

Price: $22,300 (Asking) FOB FL Condition: Very Good (Rating - 6)

2000 MiTek Smart-Set

Item No. CS1021 1998 MiTek Easy-Set Component Saw - Model 2000. This saw is a semi- automatic five-bladed component saw, with a programmable controller and computer touch screen input. This saw cuts 4x2’s and 2x4 through 2x12’s. All quadrants have powered angulation w/ electronic digital readouts and independent powered vertical adjustments, w/ digital centerline readouts. Includes a belted waste conveyor and a 12’ incline waste conveyor. This saw also includes a 5 chain Live-Deck (17’ x 9’6”)

Price: $19,900 (Type) FOB FL Condition: Very Good (Rating - 6)

1998 Easy-Set Component Saw (Click to Enlarge)

Item No. CS1022 1986 Timbermill 6-20. Cuts 2X4's though 2X12's and also cuts 4X2 floor webs. Cut pieces as short as 12" and as long as 20 feet. Length and angle changes are powered. Waste conveyor and incline conveyor included. Saw is in good working condition

Price: $10,000 (Asking) FOB CA Condition: Good (Rating - 5)

Timbermill 6-20 (Click to Enlarge)

Item No. CS1023 1986 Timbermill 5-20. 5 Bladed component saw. Waste conveyor and incline conveyor included. Saw is in good working condition

Price: $9,000 (Asking) FOB CA Condition: Good (Rating - 5)

Timbermill 5-20 (Click to Enlarge)

Item No. CS1025 5 head component saw. Built in the late 80’s. Features powered angulation on all cutting heads, powered length carriage, overhead hold-down system and shaker waste system.

Price: $9,400 (Asking) FOB LA Condition: Good (Rating - 5)

Clary Master (Model 340) (Click to Enlarge)

Item No. CS1024 4 head component saw. Cuts roof and floor parts. 5 HP motors on all cutting heads. Features self-adjusting centerline, overhead hold-down system, manual length adjustment (two heads), compound cutting adjustmen (two heads) and telescoping safety guards. Includes incline waste conveyor.

Price: $5,900 (Asking) FOB LA Condition: Good (Rating - 5)

Clary Short Cutter II(Model 329) (Click to Enlarge)

Live Support by Comm100

Item No. CS1026 The Monet WB400, 4 blade web saw gives the operator complete control of the setup process from one convenient location. Push-Button controlled movements and digital readout that shows the current position of the blades, as well as a backup, corresponding mechanical counter or scale on the saw. Features powered hold downs, pneumatic blade brakes and a vibrating waste conveyor. Also includes an incline waste conveyor. (4)16" Blades cut 2x4 or 4x2 from 5 1/2" to 16' Power: 208V 3PH

Price: $19,900 (Asking) FOB TX Condition: Very Good (Rating - 6)

1999 Monet DeSauw WB400 (Click to Enlarge)

$7,500

$13,900

$17,900

Item No. CS1027 1985 Clary Component Saw - Model 340. 5 head component saw with powered angulation on all cutting heads & powered length carriage. Includes a waste conveyor and a vacuum. Older model (shown) but in very good condition. Purchased new. Also includes five extra blades & misc spare parts.

Price: $6,900 (Asking) FOB CA Condition: Very Good (Rating - 6)

Clary Component Saw Model 340 (Click to Enlarge)

$16,900

Item No. CS1028 The Monet B500 5 blade component saw gives the operator complete control of the setup process from one convenient location. Push-Button controlled movements and digital readout that shows the current position of the blades, as well as a backup, corresponding mechanical counter or scale on the saw. Features powered hold downs, pneumatic blade brakes and a vibrating waste conveyor. Cuts from 8 to 115 degree angles. Min 90/90 cut is 14”. Shortest angle cut is 18” inches. This saw handles 2x4 through 2x12 lumber up to 20 feet in length.

Price: $14,900 (Asking) FOB GA Condition: Very Good (Rating - 8)

2000 Monet DeSauw B500 (5 Head Component Saw) (Click to Enlarge)

$5,000

$4,900

Item No. CS1028 Alpine Timbermill 6-20. Cuts 2X4's - 2X12's and also cuts webs for Floor Trusses (4x2). Two new motors. Length and angle changes are powered. Waste conveyor and incline conveyor included. Saw is in very good working condition

Price: $10,900 (Asking) FOB CA Condition: Very Good (Rating - 8)

2003 Alpine Timbermill 6-20 (Click to Enlarge)

Item No. CS1020 The Monet WB400 4 blade web saw gives the operator complete control of the setup process from one convenient location. Push-Button controlled movements and digital readout that shows the current position of the blades, as well as a backup, corresponding mechanical counter or scale on the saw. Features powered hold downs, pneumatic blade brakes and a vibrating waste conveyor. (4)16" Blades cut 2x4 or 4x2 from 5 1/2" to 16'.

Price: $19,900 (Asking) FOB AZ Condition: Very Good (Rating - 6)

2003 Monet DeSauw WB400 (4 Head Web Saw) (Click to Enlarge)

$15,900

$12,900

Item No. CS1029A Compact component saw designed for safely cutting all floor truss webs and blocks. Engineered to maximize floor-truss web production at a low cost. The 16" cut off blade permits use of random length lumber. Rapid loading of the conveyor is both convenient and easy, allowing a production rate of more than 40 boards per minute. 7’6”L x 9’ 1-1/4”W x 4’ 8-1/4”H Weight: 3,120 LBS. 480V - 3 PH

Price: $14,900 (Asking) FOB NC Condition: Very Good (Rating - 6)

1999 Alpine WebPro (Floor Web Cutter) (Click to Enlarge)

MenuMaker produced NavBar

$3,900

Item No. CS1031 1996 Mitek EasySet - Semi-automatic five-bladed component saw. Cuts 4x2’s and 2x4 through 2x12’s. All quadrants have powered angulation w/ electronic digital readouts

Price: $6,900 (Asking) FOB NJ Condition: Good (Rating - 5)

Mitek EasySet Component Saw (Click to Enlarge)