[Ratings: Fair = 1-2, Good = 3-5, Very Good = 6-8, Excellent = 9-10]
Can’t find a listing on
the machine you
need? Tell us what
you want and we will
locate the machine
that you are looking
for!
|Home|Saws|Roof Machinery|Floor Machinery|Material Handling|Trailers|Misc|Wall Panel Equipment|Resources|Financing|Legal|Site Map|
MenuMaker produced NavBar
Item No. LQ1001
This Alpine ALS was installed new in 2003 and had a 276 upgrade in 2005.
Cuts truss parts from 2x3 to 2x12 lumber width, cuts bevels from 90 to 25
degrees, 60"+ scarf cuts, optimizes material, Includes a Matthews ink jet
printing system but needs a new print head. All servo controlled functions. Drive
belts have moderate wear and the saw cuts accurately. Waste belt may need to
be replaced in the near future. Saw is in good shape mechanically and
electronically. Comes with a gravity out-feed queue roller table.
Price: $49,900 (Asking) FOB FL
Condition: Good
2003 Alpine ALS w/ 276 upgrade
(Click to Enlarge)
$26,400
FOB FL - One Location - Call for details
Item No. LQ1002
This turntable rafter cutting system can make single or double compound cuts
and simple cuts on either end of the rafter using one man. Precise angle cuts
and easy set-up. Features two worm-drive circular saws, infeed table. Required
Power: 120v Required Air: 90 psi
Price: $2,500 (Asking) FOB FL
Condition: Good (Rating - 5)
Speedcut Bevel Saw
(Click to Enlarge)
$900
Item No. LQ1004
Alpine Jack Table & Press Model 722B
Price: $4,000 (Asking) FOB FL
Condition: Good
Jack Table & Press
(Click to Enlarge)
$1600
Item No. LQ1005
Sullivan Palatek Compressor - Model 25D4J
Price: $2,500 (Asking) FOB FL
Condition: Good
Sullivan Palatek Compressor
(Click to Enlarge)
$1200
Item No. LQ1007
Champion Compressor - 120 Gal
Price: $2,500 (Asking) FOB FL
Condition: Good
Champion Compressor
(Click to Enlarge)
$1100
Item No. LQ1008
Yale Spinmaster 1.5 Ton Overhead Crane - Under Hung/Single Girder
Price: $5,000 (Asking) FOB FL
Condition: Good
Yale Spinmaster 1.5 Ton Overhead Crane
(Click to Enlarge)
$2900
Item No. LQ1009
Idaco Webomatic - Short Cutter
Price: $3000 (Asking) FOB FL
Condition: Fair to Good
Idaco Webomatic
(Click to Enlarge)
$1200
Item No. LQ1010
Metra Cut Saw Model SSA, Centerline radial arm includes center- point cutting,
turntable cutting system, 10’ In-feed and out-feed conveyors
Price: $2500 (Asking) FOB FL
Condition: Fair to Good
Metra Cut
(Click to Enlarge)
$900
Item No. LQ1011
Robbins 15’-6” Finish Roller Press with 24" Rolls (8 Baffles). Features a 10 hp
motor,
Price: $14,900 (Asking) FOB FL
Condition: Very Good
2006 Robbins Finish Press (15’-6”)
(Click to Enlarge)
$8900
Item No. LQ1012
14’ Finish Roller Press with 18" Rolls & dual motors.
Price: $6,900 (Asking) FOB FL
Condition: Good
14’ Finish Press
(Click to Enlarge)
$2900
Item No. LQ1013
14’ Finish Roller Press with 18" Rolls & dual motors.
Price: $6,900 (Asking) FOB FL
Condition: Good
14’ Finish Press
(Click to Enlarge)
$2900
Item No. LQ1014
9’ Finish Roller Press with 12" Rolls
Price: $3,900 (Asking) FOB FL
Condition: Good
9’ Finish Press
(Click to Enlarge)
$1900
Item No. LQ1015
(42) 14’ Exit rollers (21 are powered) with stands. 205’ @ 5’ O.C.
Price: $16,900 (Asking) FOB FL
Condition: Good
Powered Conveyor Roller Beds
(Click to Enlarge)
$8900
Item No. LQ1016
SpeedCut radial arm saw. Centerline radial arm includes center-point turntable
cutting system with measuring stops, 15ft. in-feed and 10 ft. out-feed
Price: $3,500 (Asking) FOB FL
Condition: Good
SpeedCut
(Click to Enlarge)
$1200
Item No. LQ1017
Cuts 2x4 webs, sliders and wedges. This saw features built in roller conveyors
on both the infeed and outfeed side. Also includes a scrap conveyor and a
Matthews ink-jet printing system. Computer, (2) monitors, motion control card
and TCT software are all included and in good working condition. Cuts down to
15 degrees. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”.
20” Blade
Price: $24,900 (Asking) FOB FL
Condition: Good
TCT 1000
(Click to Enlarge)
$11,900
Item No. LQ1018
Model1100 was designed to 2x4 & 2x6 material including tops, bottoms, webs,
sliders and wedges. This saw features built in roller conveyors on both the
infeed and outfeed side & also a scrap conveyor. Cuts down to 11 degrees on
2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to
20’. Cut 3 angle parts down to 3”. 24” Blade.
Price: $34,900 (Asking) FOB FL
Condition: Good
TCT Model 1100
(Click to Enlarge)
$15,900
Item No. LQ1019
Absolutely the fastest and safest way to cut double bevels on jack chords and
like pieces. The EZ-Trimmer is totally enclosed for maximum safety and has an
average cycle time of 15 pieces per minute. Cut double bevels on pitches from
0/12 to 12/12 including 2X6 lumber and smaller. Features a 5 HP motor, and
bevel edge, 3 wing carbide shaper cutters.
Price: $6,900 (Asking) FOB FL
Condition: Good
TCT EZ Trimmer (Jack Beveler)
(Click to Enlarge)
$3,400
Item No. LQ1020
Toyota Forlift - Model 7FGU25 - 5000 lbs
Price: $10,900 (Asking) FOB FL
Condition: Very Good
2005 Toyota Forlift (5000 lbs)
(Click to Enlarge)
$7,200
Item No. LQ1021
Toyota Forlift - Model 7FGU35 - 8000 lbs
Price: $14,900 (Asking) FOB FL
Condition: Very Good
2005 Toyota Forlift (8000 lbs)
(Click to Enlarge)
$9,000
Item No. LQ1022
48’-70’ Stretch Roll-Off Trailer - Model T-4
Price: $8,900 (Asking) FOB FL
Condition: Good
ASI (Wabash) 48-70 Stretch Roll-Off Trailer
(Click to Enlarge)
$4,900
Item No. LQ1023
48’ Roll-Off Trailer - Manual locking rollers
Price: $3,900 (Asking) FOB FL
Condition: Good
48’ Roll-Off Trailer
(Click to Enlarge)
$2,400
Item No. LQ1024
35’ Trussmaster Roll-Off Trailer - Manual locking rollers
Price: $2,900 (Asking) FOB FL
Condition: Good
35’ Trussmaster Roll-Off Trailer
(Click to Enlarge)
$1,800
Item No. LQ1025
48’ Crosley Roll-Off Trailer - Manual locking rollers
Price: $3,900 (Asking) FOB FL
Condition: Good
48’ Crosley Roll-Off Trailer
(Click to Enlarge)
$2,400
Item No. LQ1026
Truswal hydraulic chord splicer with 10’ infeed and outfeed
Price: $3,500 (Asking) FOB FL
Condition: Good
Truswal Splicer
(Click to Enlarge)
$1,800
Item No. LQ1027
1976 Yale Forklift - Model GDP-17-OR - 17,000 lbs
Reconditioned in 1989.
Price: $8,900 (Asking) FOB FL
Condition: Good
Yale Forklift (17,000 lbs)
(Click to Enlarge)
$4,200
Item No. LQ1003
Alpine Speed Roll - 40’ Floor Truss Machine
Double throat floor truss machine with air clamps, rider stand & plate rack. Table
and kick-legs in good condition
Price: $9,900 (Asking) FOB FL
Condition: Good
Alpine Floor Machine
(Click to Enlarge)
$4,500
Item No. LQ1006
Curtis Compressor - 120 Gal
Price: $2,500 (Asking) FOB FL
Condition: Good
Curtis Compressor
(Click to Enlarge)
$1200
Item No. LQ1028
Robbins Pneumatic Pop-Up Skate-Wheel Ejectors (QTY - 49)
Price: $8,900 (Asking) FOB FL
Condition: Good
Stand Alone Skate-Wheel Ejectors
(Click to Enlarge)
$4,800
$1000
$1000
$2000
$2000
$3000
$1250
$2250
$1350
$2250
$2250
$8000
$1000
Can’t find a listing on
the machine you
need? Tell us what
you want and we will
locate the machine
that you are looking
for!
Item No. LQ1001
This Alpine ALS was installed new in 2003 and had a 276 upgrade in 2005.
Cuts truss parts from 2x3 to 2x12 lumber width, cuts bevels from 90 to 25
degrees, 60"+ scarf cuts, optimizes material, Includes a Matthews ink jet
printing system but needs a new print head. All servo controlled functions. Drive
belts have moderate wear and the saw cuts accurately. Waste belt may need to
be replaced in the near future. Saw is in good shape mechanically and
electronically. Comes with a gravity out-feed queue roller table.
Price: $49,900 (Asking) FOB FL
Condition: Good
2003 Alpine ALS w/ 276 upgrade
(Click to Enlarge)
$26,400
FOB FL - One Location - Call for details
Item No. LQ1002
This turntable rafter cutting system can make single or double compound cuts
and simple cuts on either end of the rafter using one man. Precise angle cuts
and easy set-up. Features two worm-drive circular saws, infeed table. Required
Power: 120v Required Air: 90 psi
Price: $2,500 (Asking) FOB FL
Condition: Good (Rating - 5)
Speedcut Bevel Saw
(Click to Enlarge)
$900
Item No. LQ1004
Alpine Jack Table & Press Model 722B
Price: $4,000 (Asking) FOB FL
Condition: Good
Jack Table & Press
(Click to Enlarge)
$1600
Item No. LQ1005
Sullivan Palatek Compressor - Model 25D4J
Price: $2,500 (Asking) FOB FL
Condition: Good
Sullivan Palatek Compressor
(Click to Enlarge)
$1200
Item No. LQ1007
Champion Compressor - 120 Gal
Price: $2,500 (Asking) FOB FL
Condition: Good
Champion Compressor
(Click to Enlarge)
$1100
Item No. LQ1008
Yale Spinmaster 1.5 Ton Overhead Crane - Under Hung/Single Girder
Price: $5,000 (Asking) FOB FL
Condition: Good
Yale Spinmaster 1.5 Ton Overhead Crane
(Click to Enlarge)
$2900
Item No. LQ1009
Idaco Webomatic - Short Cutter
Price: $3000 (Asking) FOB FL
Condition: Fair to Good
Idaco Webomatic
(Click to Enlarge)
$1200
Item No. LQ1010
Metra Cut Saw Model SSA, Centerline radial arm includes center- point cutting,
turntable cutting system, 10’ In-feed and out-feed conveyors
Price: $2500 (Asking) FOB FL
Condition: Fair to Good
Metra Cut
(Click to Enlarge)
$900
Item No. LQ1011
Robbins 15’-6” Finish Roller Press with 24" Rolls (8 Baffles). Features a 10 hp
motor,
Price: $14,900 (Asking) FOB FL
Condition: Very Good
2006 Robbins Finish Press (15’-6”)
(Click to Enlarge)
$8900
Item No. LQ1012
14’ Finish Roller Press with 18" Rolls & dual motors.
Price: $6,900 (Asking) FOB FL
Condition: Good
14’ Finish Press
(Click to Enlarge)
$2900
Item No. LQ1013
14’ Finish Roller Press with 18" Rolls & dual motors.
Price: $6,900 (Asking) FOB FL
Condition: Good
14’ Finish Press
(Click to Enlarge)
$2900
Item No. LQ1014
9’ Finish Roller Press with 12" Rolls
Price: $3,900 (Asking) FOB FL
Condition: Good
9’ Finish Press
(Click to Enlarge)
$1900
Item No. LQ1015
(42) 14’ Exit rollers (21 are powered) with stands. 205’ @ 5’ O.C.
Price: $16,900 (Asking) FOB FL
Condition: Good
Powered Conveyor Roller Beds
(Click to Enlarge)
$8900
Item No. LQ1016
SpeedCut radial arm saw. Centerline radial arm includes center-point turntable
cutting system with measuring stops, 15ft. in-feed and 10 ft. out-feed
Price: $3,500 (Asking) FOB FL
Condition: Good
SpeedCut
(Click to Enlarge)
$1200
Item No. LQ1017
Cuts 2x4 webs, sliders and wedges. This saw features built in roller conveyors
on both the infeed and outfeed side. Also includes a scrap conveyor and a
Matthews ink-jet printing system. Computer, (2) monitors, motion control card
and TCT software are all included and in good working condition. Cuts down to
15 degrees. Cut 4 angle parts from 13.5” to 20’. Cut 3 angle parts down to 3”.
20” Blade
Price: $24,900 (Asking) FOB FL
Condition: Good
TCT 1000
(Click to Enlarge)
$11,900
Item No. LQ1018
Model1100 was designed to 2x4 & 2x6 material including tops, bottoms, webs,
sliders and wedges. This saw features built in roller conveyors on both the
infeed and outfeed side & also a scrap conveyor. Cuts down to 11 degrees on
2x4 parts and down to 22 degrees on 2x6 parts. Cut 4 angle parts from 13.5” to
20’. Cut 3 angle parts down to 3”. 24” Blade.
Price: $34,900 (Asking) FOB FL
Condition: Good
TCT Model 1100
(Click to Enlarge)
$15,900
Item No. LQ1019
Absolutely the fastest and safest way to cut double bevels on jack chords and
like pieces. The EZ-Trimmer is totally enclosed for maximum safety and has an
average cycle time of 15 pieces per minute. Cut double bevels on pitches from
0/12 to 12/12 including 2X6 lumber and smaller. Features a 5 HP motor, and
bevel edge, 3 wing carbide shaper cutters.
Price: $6,900 (Asking) FOB FL
Condition: Good
TCT EZ Trimmer (Jack Beveler)
(Click to Enlarge)
$3,400
Item No. LQ1020
Toyota Forlift - Model 7FGU25 - 5000 lbs
Price: $10,900 (Asking) FOB FL
Condition: Very Good
2005 Toyota Forlift (5000 lbs)
(Click to Enlarge)
$7,200
Item No. LQ1021
Toyota Forlift - Model 7FGU35 - 8000 lbs
Price: $14,900 (Asking) FOB FL
Condition: Very Good
2005 Toyota Forlift (8000 lbs)
(Click to Enlarge)
$9,000
Item No. LQ1022
48’-70’ Stretch Roll-Off Trailer - Model T-4
Price: $8,900 (Asking) FOB FL
Condition: Good
ASI (Wabash) 48-70 Stretch Roll-Off Trailer
(Click to Enlarge)
$4,900
Item No. LQ1023
48’ Roll-Off Trailer - Manual locking rollers
Price: $3,900 (Asking) FOB FL
Condition: Good
48’ Roll-Off Trailer
(Click to Enlarge)
$2,400
Item No. LQ1024
35’ Trussmaster Roll-Off Trailer - Manual locking rollers
Price: $2,900 (Asking) FOB FL
Condition: Good
35’ Trussmaster Roll-Off Trailer
(Click to Enlarge)
$1,800
Item No. LQ1025
48’ Crosley Roll-Off Trailer - Manual locking rollers
Price: $3,900 (Asking) FOB FL
Condition: Good
48’ Crosley Roll-Off Trailer
(Click to Enlarge)
$2,400
Item No. LQ1026
Truswal hydraulic chord splicer with 10’ infeed and outfeed
Price: $3,500 (Asking) FOB FL
Condition: Good
Truswal Splicer
(Click to Enlarge)
$1,800
Item No. LQ1027
1976 Yale Forklift - Model GDP-17-OR - 17,000 lbs
Reconditioned in 1989.
Price: $8,900 (Asking) FOB FL
Condition: Good
Yale Forklift (17,000 lbs)
(Click to Enlarge)
$4,200
Item No. LQ1003
Alpine Speed Roll - 40’ Floor Truss Machine
Double throat floor truss machine with air clamps, rider stand & plate rack. Table
and kick-legs in good condition
Price: $9,900 (Asking) FOB FL
Condition: Good
Alpine Floor Machine
(Click to Enlarge)
$4,500
Item No. LQ1006
Curtis Compressor - 120 Gal
Price: $2,500 (Asking) FOB FL
Condition: Good
Curtis Compressor
(Click to Enlarge)
$1200
Item No. LQ1028
Robbins Pneumatic Pop-Up Skate-Wheel Ejectors (QTY - 49)
Price: $8,900 (Asking) FOB FL
Condition: Good
Stand Alone Skate-Wheel Ejectors
(Click to Enlarge)
$4,800
$1000
$1000
$2000
$2000
$3000
$1250
$2250
$1350
$2250
$2250
$8000
$1000
